Lift: Sport 3.5"(90mm) / Rubicon 2.5"(65mm)
The Old Man Emu engineers’ objective was to develop a complete suspension system for the new Jeep Wrangler JL, suiting both 2-door and 4-door variants. Comprehensive research and vehicle testing along with countless hours of engineering resources were dedicated to the development of Old Man Emu suspension for the JL. Old Man Emu is proud to offer an integrated 3.5 inch system (2.5 inch for Rubicon) that easily bolts on and provides excellent control off-road. The Jeep Wrangler JL suspension has been developed as a complete suspension system to ensure alignment can be returned to factory specifications.
- Light Load Coil Springs (0-90lbs)
- 3.5" lift on Sport models
- 2.5" lift on Rubicon models
- (2) Front Nitrocharger Sport Shocks
- (2) Rear Nitrocharger Sport Shocks
- (2) Front Coil Springs
- (2) Rear Coil Springs
- (2) Front Lower Control Arms
- (4) Sway Bar Links
- (2) Front Bump Stops
- (2) Rear Bump Stops
- (2) Front Coil Packer
- (2) Rear Coil Packer
- (1) Front Track Bar
- (1) Rear Track Bar
Old Man Emu 4×4 Suspension
Undoubtedly, a modest shock absorber is one of the most undeservedly ignored components of the suspension of a modern all-wheel-drive car. On the road, the suspension of the car, and especially the shock absorbers, is subjected to the strongest impact, is in constant motion. Without a good shock absorber, you will at best pass a little more than 50 meters before it starts to shake insanely. How can each shock absorber with crossed terrain, both on the road and off-road? Can they give the driver a sense of confidence? How will they cope with the woodland? After all, in addition to the price, it is these factors that influence our choice when we are looking for new shock absorbers. The main function of the shock absorber is to slow down and control the movement of the car as the suspension is experiencing all kinds of movement. A good shock absorber can control the movement of the wheels when driving on bumps, and also keep the grip of tires with the track.
With a changing speed, controlling the movement of the spring is not so easy. Every bump that responds inside the car must be damped by springs and shock absorbers. If the latter can not cope with the task, then the majority of all-wheel drive cars will shake mercilessly on the road. Unsuitable shock absorbers cause not only unpleasant sensations when traveling, but also make driving dangerous regardless of speed. Old Man Emu 4×4 suspension by ARB combines all these qualities and guarantees the quality of its product. Over the development of parts work exclusively professionals. Used only quality, original podcast. For this there is a complete complete set. In the process of creating a balance of the shock absorber there are a number of subtleties, considering that it is necessary to maintain maximum control over the movement without sacrificing convenience at the same time. Old Man Emu invest in endless research and innovation to create the shock absorbers suitable for every car and type of route. It is this balance of control and comfort for your good shock absorber.
OME suspension parts are developed, tested and manufactured in Australia. OME can offer you the only fully developed and completed suspension system. The system, all the details of which fully match each other. In the design department of the OME various types of shock absorbers are developed and tested together with the corresponding springs. After a thorough check of shock absorbers and springs under different road conditions and with varying degrees of load of the car, the developers make changes in their design. Tests and changes continue until the ideal match of the technical characteristics of the springs or springs of each particular model of the car is achieved. The company steadfastly follows its principles, being in constant search of optimal solutions, which guarantees the correspondence of details to each other and the ideal operation of the components of the system, as well as provides the best solution to suspension problems.
OME delivers all the necessary parts and accessories in addition to springs and shock absorbers, including polyurethane bushes for a more quiet and free operation of springs, steering dampers, suspension earrings.
Old Man Emu Suspension Lift Kit 3,5" (Heavy Load) Jeep Wrangler JL (OMEJL2DHKS) - Features
|Brand || Old man emu |
|Category || Lift kits |
|Installation side || Front, Rear |
|Lift Height, mm || 65mm, 90mm |
|Lift Height, inch || 2,5", 3,5" |
|Front Load || Bar, Bar & Winch |
|Rear Load || 150kgs |
|Make || Jeep |
|Model || Wrangler |
|Bar Code || 9332018061119 |
|Comment || Lift: Sport 3.5"(90mm) / Rubicon 2.5"(65mm) |